I’m trying to get to the screws under the spindle cap, but they’re stuck under it, so I was wondering if getting rid of these screws highlighted would help me to get to those screws

  • AbidingOhmsLaw@lemmy.mlEnglish
    2·
    4 days ago

    Just turn it until the notch aligned with the screw, then unscrew the screw while pressing in slightly on the side of the notch.

    Edit: That second picture in your original post shows the notches aligned with the screws, so it should be that way. You could take a playing card and try to slip it between the two see if there is anything binding it.