Dynamics processor is an umbrella term for any kind of processing that impacts the dynamic range (amplitude of your waveform).
Compressors are a type of dynamic processing that are used to reduce (compress) the amplitude of your waveform. When your piece is finished you might use one on the overall mix to smooth out your dynamic range (reduce the difference between the loudest and the quietest sounds) which can make the whole mix feel more cohesive.
On individual tracks you would use the compressor to get various effects. Often you use one so you can turn up a track without it clipping.
You might use it to make a kick or snare sound more snappy. For ex. on a snare you would typically apply compression with a quick attack, a high ratio, and a low threshold.
If a vocal part is too soft you can use compression to make it sound louder (though as a live sound engineer I recommend making the vocalist sing louder or closer to the mic ;) ). I was taught to record at about -12dB to give yourself enough headroom and avoid having to over compress during post processing.
You can use side chaining compression on the kick to get the pumping effect you hear in genres like dubstep.
Peak limiter is just a compressor with a high ratio. Compressing the peaks can give you more room to turn up your overall mix to make it louder for example. You don’t want to crush the peaks too much or you will just get clipping.
Plugins will often include various types of compression.
Sorry I was a bit all over the place, there are many many uses!
Dynamics processor is an umbrella term for any kind of processing that impacts the dynamic range (amplitude of your waveform).
Compressors are a type of dynamic processing that are used to reduce (compress) the amplitude of your waveform. When your piece is finished you might use one on the overall mix to smooth out your dynamic range (reduce the difference between the loudest and the quietest sounds) which can make the whole mix feel more cohesive.
On individual tracks you would use the compressor to get various effects. Often you use one so you can turn up a track without it clipping.
You might use it to make a kick or snare sound more snappy. For ex. on a snare you would typically apply compression with a quick attack, a high ratio, and a low threshold.
If a vocal part is too soft you can use compression to make it sound louder (though as a live sound engineer I recommend making the vocalist sing louder or closer to the mic ;) ). I was taught to record at about -12dB to give yourself enough headroom and avoid having to over compress during post processing.
You can use side chaining compression on the kick to get the pumping effect you hear in genres like dubstep.
Peak limiter is just a compressor with a high ratio. Compressing the peaks can give you more room to turn up your overall mix to make it louder for example. You don’t want to crush the peaks too much or you will just get clipping.
Plugins will often include various types of compression.
Sorry I was a bit all over the place, there are many many uses!