Yea, a 3-point jig would work. I.E. make a right triangle with three holes the right distance apart.
Place it over the wood and drill through the first two holes holding it steady and square.
From there it gets easy, just put pegs in two of the holes of the jig, pushed through into the two holes you drilled in the board behind it. Now the jig doesnt move and you can drill the third hole. Rotate and spin from there to do all the rest.
Are there “sheets” of anything you can get cheap? Or from sonsignment? You could make a jig and drill a bunch of holes to make one?
I could buy some ply or mdf and have a go myself, but precision drilling would be difficult
Yea, a 3-point jig would work. I.E. make a right triangle with three holes the right distance apart.
Place it over the wood and drill through the first two holes holding it steady and square.
From there it gets easy, just put pegs in two of the holes of the jig, pushed through into the two holes you drilled in the board behind it. Now the jig doesnt move and you can drill the third hole. Rotate and spin from there to do all the rest.
A total pain for sure, though 😀
huh, you’ve opened my eyes to the possibility of it!
I just saw your last post. If you can do that birthday math, you can do this 😄