I wanted to try out Dune for the first time and it just didn’t power on. I am not ok. I took a look inside and cleaned it, but there’s no obvious loose connections. Today is a sad day for me
I wanted to try out Dune for the first time and it just didn’t power on. I am not ok. I took a look inside and cleaned it, but there’s no obvious loose connections. Today is a sad day for me
Maybe dead capacitors? If you don’t have a multimeter and soldering iron, this is a good excuse to get/learn those things!
I do have both of those things but I don’t feel I have the expertise. Maybe I’ll give it a go in a few days.
It makes a high-pitched whine when plugged in, I also wondered if that could be a capacitor making the noise. Or maybe the coil right near the incoming power supply, I could imagine that making such a notice as well
Probably true, but everyone starts out like that, and its already broke. Either you fix it and youre a hero, or it stays broke and whatever
I’m no expert either but a first step would be to take the case off and listen for which part the whine is coming from. That may clue you in.
You can also touch parts and see if any are extra warm/hot soon after start up.
That can help direct your trouble shooting.
Don’t buy parts until you have a clue as to what might be happening. It’ll save you money.
Don’t touch the inside of a psu, this can kill you very rapidly and you’ll feel it the whole time.
Not usually… I mean please do read up/watch some youtube videos on electronic repair safety, but for the most part the power supply of a ps1 lives in the unpleasant shock realm of zapping power.
Talk like this scares people away from doing their own repairs.
From what I can tell, there’s only one 200V cap in a PS1, so as long as you don’t short that you’ll be fine.
I still caution against the advice of feeling open electrical components to find problems. Just use a multimeter. You short something with a meter and you just need new leads, short something spicy with your fingers and you could either get a nasty sting, or stop your heart. The risk/reward on that seems a little off.
When trouble shooting sometimes chips, caps or resistors can get much hotter than surrounds parts. It can let you know to inspect that part for replacement.
Sure don’t grab leads with your fingers but sometimes you can tell something like a voltage regulator is malfunctioning because it just gets really hot.
I mean you can just use an IR camera but most people don’t have one.
Gotta love that classic “Not only will this kill you, it will hurt the whole time”
Definitely try replacing the capacitors. They just don’t live that long.
https://wiki.console5.com/wiki/PlayStation
If you don’t have a lot of expertise with soldering, here’s a few basic tips:
Don’t set the iron too hot, because if you burn the wires it’s pretty much gg. Use lots of flux. To remove the old caps, just cut them off, they are cheap and replaceable.
Good luck!