Tried to

  • CmdrShepard49@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    23
    ·
    2 days ago

    I see what you mean now.

    Even still, our toilets in the US are bolted to the floor and only sealed with caulking along the floor to keep water from pooling underneath and rotting the floor. With our American diets, we rely on the structural rigidity of metal bolts to keep things in place during our massive dumps

    • Perspectivist@feddit.ukOP
      link
      fedilink
      English
      arrow-up
      7
      ·
      2 days ago

      This came with installation hardware too, but a lot of new toilets don’t even have holes for bolts nowadays. The adhesive is more than sufficient to hold it down to the floor tiles. The silicone caulking I use to tidy it up afterwards just adds to that hold.

      The main reason to not use bolts is to avoid drilling into the floor and puncturing the water proofing membrane or floor heat pipes/cables.

      • sauce@lemmy.dbzer0.com
        link
        fedilink
        English
        arrow-up
        7
        ·
        2 days ago

        When toilets are bolted to the floor you don’t drill into the floor, the bolts are captive in a pre installed toilet flange that was placed before the flooring was installed.

    • FlexibleToast@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      2 days ago

      But it’s also the big reason first time installers struggle. They tighten those bolts too much and crack three porcelain.