Why YSK: Even if you don’t own a gun, there is a chance you can encounter one at the home of a friend or family member. These are the four core rules of gun safety, but the same can be used with airsoft/paintball guns, nerf or even chemical spray bottles!
First, treat every firearm as if it were loaded. Even if it was clear the last time you saw it. If looking at a gun with someone else and they assure you it’s not loaded, you can respectfully ask them to clear it in front of you before you handle it yourself.
Never point a gun at anything you are not willing to destroy. Pretend there is a lazer beam coming from the barrel. Don’t let that “beam” point at anyone. That is known as “flagging”. In nearly all cases keeping the barrel pointing down between your feet is a good move.
Keep your finger off the trigger until you are ready to fire. This includes the whole trigger guard area. Most people keep their finger on the frame well above the trigger guard, pointing their finger in the same direction as the barrel. This is known as “trigger discipline”.
Finally be sure of your target and what’s behind it. Bullets can still travel a long way even after they pass through a target. If you are target shooting make sure there is a solid backstop. If in a real life situation you must positively ID the threat, no shooting at shadows or noises.


There is a good Hydraulic press video of high-pressure injections into clear ballistic gel, and it’s fuckin wild. You can have something that looks like a little dribble of water coming out of a flexible line. Grab the line to remove it and bam, you just had a bunch of hydraulic fluid shot into your bloodstream, which will create an oil embolism and kill you.
Holmatro does as well, specifically with that injury being simulated using a ballistic gel arm with fake bones in it, at 750 bar/10.4k psi. The oil from that simulated 10.4k psi leak blew right through that fake hand.
I kinda don’t wanna imagine how terrible that would be to happen to someone in the real world if they touched an actual leaky hose at those pressures in the field. Also…
That’d have to be at close range though, to create some sort of a temporary seal, right (as far as my physics intuition says)? Otherwise it should behave roughly similar to water in an open environment, where it would have to be the speed of the jet hitting you that does the raw damage.
Yeah, you pretty much need surface to surface contact.
Hard pass on that Jesus.