This is assuming that installing an AC is an alternative.
I can’t install one in my apartment, there’s just no way to set up the outdoor unit for the bedroom. Our windows don’t accommodate window units, being casement windows. That leaves portable units, which are not particularly effective, and on top of that forces a serious amount of sunlight into the bedroom, hence ruining the whole thing. Dawn is at 02:04 here, fwiw.
My only hope really is that my apartment building would install some kind of central cooling solution, which is an incredibly expensive endeavour.
I already have a portable unit and a sealing kit, plus blackout curtains. The curtains can’t be deployed with the window opened enough to get the hose out. Running without any blackout curtains is an immediate non-starter since dawn is at 02:00 here, and my bedroom window is to the east.
Trying to buy an air conditioner mid heatwave probably won’t work too well but if youplan ahead then maybe next year you’ll have one ready instead of needing one and not having it
My only hope really is that my apartment building would install some kind of central cooling solution, which is an incredibly expensive endeavour.
This comment got me wondering how apartments can retrofit their central heat into some kind of climate control that goes both ways.
For apartments with ducts and forced air, it seems like the central furnace/boiler can probably be replaced with some kind of heat pump setup for more efficient heating in the winters, and reversed to provide cooling in the summers, through the same air ducts. The total cost/complexity would probably depend heavily on the space for the furnace and its service/maintenance, I imagine.
With steam/hot water radiators, though, I imagine it’s even harder. Can these systems safely be modified to pump cold water?
Or, if they need to add ducts where none currently exist, that seems like it would be unbelievably complex and expensive, if people are going to be living there the whole time. Seems like a real challenge.
I’d be curious why it’s impossible to set up a mini-split in your bedroom. That seems… Illogical. They are surface mounted pretty much anywhere externally, require a small hole to be drilled for the fluid exchange, and the mini split can fit inside any room on the wall or ceiling. Power shouldn’t be a problem either as that’s easy to wire through the same hole as the fluid exchange if need be.
Idk, I’m not an installer but the tech seems like you could make it work on a barn in the country or in the non-sensical backrooms - it’s not very demanding.
You can mod the portable ones to be basically as efficient as the proper units by installing a second hose over the hot side intake and adding that to your window seal kit so there are two hoses. The only inefficiency left then is the exhaust hose acting as a bit of a radiator but especially if you place it by the window and keep the hose short, that’s not really that big of a deal.
They are bloody noisy though. There are some properly split window units finally coming onto the European market that will be better for that but still very expensive
Look up split unit portable heat pumps such as the Midea PortaSplit or similar. They fix a lot of the issues with regular portable units and can also heat. They are however quite a bit more expensive.
This is assuming that installing an AC is an alternative.
I can’t install one in my apartment, there’s just no way to set up the outdoor unit for the bedroom. Our windows don’t accommodate window units, being casement windows. That leaves portable units, which are not particularly effective, and on top of that forces a serious amount of sunlight into the bedroom, hence ruining the whole thing. Dawn is at 02:04 here, fwiw.
My only hope really is that my apartment building would install some kind of central cooling solution, which is an incredibly expensive endeavour.
Depending on how far your windows crank out, they do make tall narrow window units too.
deleted by creator
Get one of the portable ones and get one of those kits that seal around the hose to the window and then get some curtains.
I already have a portable unit and a sealing kit, plus blackout curtains. The curtains can’t be deployed with the window opened enough to get the hose out. Running without any blackout curtains is an immediate non-starter since dawn is at 02:00 here, and my bedroom window is to the east.
sounds like a job for duct tape
There is not a single one in stock in the entire UK, plus dual hose versions are basically non existent here too.
Trying to buy an air conditioner mid heatwave probably won’t work too well but if youplan ahead then maybe next year you’ll have one ready instead of needing one and not having it
What if I invest money in AC and it will never be this hot again?
It’s going to be this hot again, and worse. This is well-known.
This comment got me wondering how apartments can retrofit their central heat into some kind of climate control that goes both ways.
For apartments with ducts and forced air, it seems like the central furnace/boiler can probably be replaced with some kind of heat pump setup for more efficient heating in the winters, and reversed to provide cooling in the summers, through the same air ducts. The total cost/complexity would probably depend heavily on the space for the furnace and its service/maintenance, I imagine.
With steam/hot water radiators, though, I imagine it’s even harder. Can these systems safely be modified to pump cold water?
Or, if they need to add ducts where none currently exist, that seems like it would be unbelievably complex and expensive, if people are going to be living there the whole time. Seems like a real challenge.
I think this would result in humidity issues.
I’d be curious why it’s impossible to set up a mini-split in your bedroom. That seems… Illogical. They are surface mounted pretty much anywhere externally, require a small hole to be drilled for the fluid exchange, and the mini split can fit inside any room on the wall or ceiling. Power shouldn’t be a problem either as that’s easy to wire through the same hole as the fluid exchange if need be.
Idk, I’m not an installer but the tech seems like you could make it work on a barn in the country or in the non-sensical backrooms - it’s not very demanding.
I’m not going to be able to get an installer to mount a unit up on the floor where I live. It’s higher up than the 10th floor.
I’m also not going to be able to get the permit from the association to drill up a unit.
You can mod the portable ones to be basically as efficient as the proper units by installing a second hose over the hot side intake and adding that to your window seal kit so there are two hoses. The only inefficiency left then is the exhaust hose acting as a bit of a radiator but especially if you place it by the window and keep the hose short, that’s not really that big of a deal.
They are bloody noisy though. There are some properly split window units finally coming onto the European market that will be better for that but still very expensive
Look up split unit portable heat pumps such as the Midea PortaSplit or similar. They fix a lot of the issues with regular portable units and can also heat. They are however quite a bit more expensive.
I’m not sure it would be safely possible to mount the outdoor unit where I live, but it certainly does look like an interesting product.