Now that I have time for hobbies again I wanna dive right in to building up a home lab. Right now I just have a Netgear router that reached end of life, and a NAS i’d like to make accessible remotely, and a DIY router seems like the correct next step for me. I’m very interested in ad-blocking network wide and someday I’d like to host my own little webpage, but for now I’m really just barely getting started.
I’m information gathering, I don’t know what I don’t know and my networking skills are pretty weak anyway. But even if your needs and desires have nothing to do with mine, I also just like to hear people talk about their set ups. Please? 🌞
The layout I’m designing around is inline: ISP router, then a small dual-ethernet box doing firewall and DNS filtering, then your LAN. For a start, I’d put OPNsense on a cheap dual-NIC mini PC. You get network-wide blocking through a plugin and a VPN to reach your NAS, and VLANs can wait until you need them. I’m biased, since I’m building a box with that exact layout. What I can’t settle: for someone starting out, is an all-in-one box less scary, or does it hide the stuff you’d want to learn?
I bought a firewall appliance based on an Intel CPU, with 4x 2.5gbps Ethernet ports, 8gb ram. Installed opnSense on it and been super happy even since!
A bit pricey the hardware, but it’s been totally rock solid for almost two years now.
I have configured unbound with ad blocking on opnSense, and it has every single option I would ever want on it. Amazing stuff.
I’m eyeing a similar one, but with 2x sfp+ ports too.
I’ve seen a lot of people on YouTube talking about this or that cast off networking device that they turned into a router. I do find the idea of repurposing especially old tech appealing. Or did you buy it brand new?
I bought it new, but of course you can repurpose old hardware!
Opnsense on whatever. Plus pihole for DNS/adblock.
I put Opnsense on an Intel Pentium G3220 and it’s been rock solid for gigabit.
Not sure how “DIY” you want to go. I’ve been liking OPNSense though. Running it on an air cooled Protectli box.
Handles a symmetric 2Gbps connection just fine.
This is what I’m doing too. I’m super happy with the results and how many options are now open to me.
Originally I was thinking I’d find a used business mini pc and put some open source router OS on there, still haven’t picked which one. But I’ve gotten super into, like, being cautious about power consumption and some of the little boxes you can get on AliExpress seem like that might be a better option? I’m not sure yet. What’s a Protectli, if you don’t mind?
This is protectli: https://protectli.com/
If you’re especially looking for good power consumption, I’d look into some embedded system with OpenWRT. I was especially looking for something that could handle high bandwidth and manage some higher level features that OPNSense has.
Thank you!
Someone suggested seeing if I could install openWRT on my current router, I might start there instead of buying anything right away, I can always grow more later as I find I’m ready to start doing x, y. or z if I find I need to.
But I’d never heard of protectli. I have a feeling that, since I was just browsing youtube to start, I mostly only learned about companies that are doing youtube sponsorships lol
Someone suggested seeing if I could install openWRT on my current router, I might start there instead of buying anything right away, I can always grow more later as I find I’m ready to start doing x, y. or z if I find I need to.
I like the spirit! That’s an excellent place to start. If you find you need more later, there’s plenty of options to grow.
OpenWRT all the way.
Skynet firewall
PiHole
Stable IP addresses and a private interface for family phones/laptops/pcs
Guest network for nasty Roku TV/peleton
EDIT: my favorite thing about Skynet is the new-ish ability to filter by country
I never even thought about a guest network for different services. Why do you do that, if you don’t mind? Privacy?
You could configure different settings, such as preventing the device from connecting to ad servers. You also prevent it from scanning your network to learn about all your devices, since all it would be limited to that isolated network.
Does peloton do that!? 🥲
I don’t know. Is it internet connected? If so I wouldn’t trust it…
Many home grade routers allow you to set up a guest WiFi network though so you may be able to isolate it that way if you’re concerned/can determine what telemetry it’s sending from the privacy policy or other reports.
This article talks about their website’s standard creepy tracking cookies and stuff, which depressingly everyone does. https://blog.avast.com/what-peloton-knows-about-you-avast
But if it has Bluetooth and WiFi it has a lot of potential for tracking all sorts of things. I don’t have one and don’t know if they’re using that potential, but it’s there. It would be interesting to investigate.
I only got into privacy stuff like a year ago, but I was really focused on thinking about my phone and not as much my home network (unless we’re talking like, cloud services that are also accessed on desktop, I was already worried about those). That’s a spooky but totally valid thought imo. Agree, would be a good new rabbit hole to explore.
It’s a big rabbit hole for sure, with how many household devices are internet connected and the concerning capabilities they offer. And an expensive one if you seek to replace devices at home.
Guest Network in OpenWRT prevents inter-device communication on the LAN. So the thing can talk to its cloud service or whatever but can’t see my phone/laptop/PCs.
This means that untrusted devices which get pw0ned (or are surveillance-by-design) can’t then get into your more important machines. Most people use guest networks for IoT devices like Ring cams and smart washing machines but I don’t even own shit like that.
Lol I also passed up on ring cameras, i’d like to have a camera someday but I don’t want to go through Amazon.
I wonder if I should set up a guest network for my mother-in-law. 🤔 My husband is very on-board with my privacy-focused desires and cautious about what we invite into the home but my MIL, well, is old.
A used Lenovo ThinkCentre Tiny M720q mini PC, with the PCIe riser and an Intel chipset (Huawei) dual-10 Gbit NIC, running a pretty basic install of OpenWrt. Has no issue with 10 Gbit throughput, maxes out at about maybe 12 Gbit if you do a full duplex test, which I think may be a limitation of the limited PCIe lanes in the riser.
I got 10 Gbit internet at home, looked at the prices of 10 Gbit routers and noted right out! Built this for maybe $100 in stuff off of auctions.
I usually just use proper network devices. OpenWRT will generally run on anything with Mediatec or Qualcomm based assuming it has support
Another vote for openwrt
A fanless thin client with Opnsense and a four-port Intel NIC.
This is the way!
Currently running OPNsense on a small Dual-Nic Shuttle PC with an Pentium G4560 and 4 gigs of ram and it’s been handling everything I throw at it perfectly fine. Ive got 16 Interfaces, around 10 Wireguard Peers and a SIT tunnel to HE and Im still getting Line Speeds through the firewall.
I’ve never gotten DIY routers including opnsense to give gigabit line speeds once VLANs are enabled.
a minipc with 2 nics running proxmox with opnsense as a vm and one of the nics passed through. that way I can use it for more stuff.
When I retire my desktop PC, the old parts become my router. If you have two network ports, it can do it.
To warrant the power bill, it’s also a NAS, NVR, mail server, print server and web server.
All my Wifi APs are various home routers flashed with OpenWRT.
Running an email server sounds super super difficult
I’ve been running mine for over 20 years. It’s certainly got more difficult, especially to be able to reliably communicate with Gmail-hosted servers and outlook.com addresses, but SPF, DMARC, and DKIM are all pretty straightforward to set up. Tightening the encryption/hash algorithms you accept and “anonymizing” your server greetings takes some finesse as well, but I definitely prefer it this way.
I avoid the entire webmail and spam filtering aspects, smtp(s) and imap(s) only.
Not difficult with amazing software like mailcow
Oh, you can tear it down as soon as you get the certification.
Mine still runs decades later though.
I was using an N100 based mini PC and it did fine at 1gbit. But now that I have 3, and it’s realistically closer to 4 or 5 it doesn’t cut the mustard.
Proper hardware based routers are also just so much more efficient. That N100 machine was constantly hot to the touch. My new UniFi router uses less power and does 10 gig easily.
I have 2.5G N100 and it works wonderfully at that rate. I think higher might be tough, but it still pushes that throughput even with IPS enabled in OPNsense.
The complained about heat is right though. I stuck a noctua fan on the top and it’s been happy since. It lives my closet, so noise isn’t a facto anyways
Can I ask what the 10 gig is for?
Gotta go fast. My WiFi can achieve > 1gbit, my internal network is already 10 gig. Why not support faster everywhere?
Sometimes it’s really that simple 🥰
I had a virtualized PFsense box for a while doing my inherent. Was actually pretty solid even when having to wrangle the quirks having a virtualized firewall/router caused.
I have something similar it’s been working great.
I have been thinking of trying to set up a “router on a stick” as a live backup but once I started researching it, it got daunting.
I do this at work. If you don’t do pass through for the NICs I’d highly suggest it. When it’s a router it’s insane how much the overhead can be.
We have a 4 gig connection and with the virtual nics got maybe just over 1gbit on a Xeon silver based R640. But after pass through solid 3.5ish. Not sure where the bottleneck is currently, but our other servers do >4 just fine.
OpenWrt on Raspberry Pi 4 with UE300 dongle for the WAN side. 7 years of trouble-free operation so far.
What’s the throughput on that bad boi?
I’ve only tested up to 1Gb. It does 1Gb no probs, with SQM (QoS) which burns a lot of CPU.
Okay cool, thank you
HP Prodesk with some i5 8th gen running proxmox and with a 4x 1gb pcie nic on which a opnsense vm runs.
My DNS was done through pihole. Transitioned now to technitium-dns.
My personal blocklist(s):
https://github.com/Appoxo/Ad-Spam-Blocklist
Contains a list for opnsense (IPs) and technitium-dns (but pihole should be compatible).
Anything else should be mentioned in the readme.In case of questions, feel free to ask.
