Hot water dissolves lead more quickly than cold water and is therefore more likely to contain greater amounts of lead. Never use water from the hot water tap for drinking, cooking, or making baby formula.
Hot water dissolves lead more quickly than cold water and is therefore more likely to contain greater amounts of lead. Never use water from the hot water tap for drinking, cooking, or making baby formula.
This seems…questionable. The entire information given is two sentences. This seems like something an eighth grader wrote for a school project.
‘Hot water dissolves lead faster’. Ok, how much faster? I feel like the trip from the water heater to my sink is negligible even if I had lead pipes, which I don’t.
If anyone has anything more substantial, please post it.
When I moved into my house, I ran tests on my tap water, and found that my hot water had higher levels of iron and other metals dissolved in it. This is likely corrosion from the water heater tank. After I replaced the anode rod, the tests came out nearly identical.
All of the levels I found were within the legal limits for human consumption, so it would’ve been fine… But maybe there are cases where that isn’t true. The tests were very cheap, and Home Depot near me offers a 3 test kit (including lead) for free, near the water filter section. It’s worth testing to be certain.
Chemical engineer here. The difference in temperature between your cold and hot water supplies is what the problem is, and I would imagine this is not a problem at all in modern plumbing systems. Your cold water supply is usually about 50-60 deg F (10-15 C) while your hot water supply us usually set to 140 F (60 C). Solubility of some lead salts in water are given in this table with lead chloride being about 0.8 g/100mL at 10 C and 1.98 g/100mL at 60 C, so about 2.5x more soluble. The rate itself is a more complicated relationship, but it increases rapidly as well. Temperature has a big effect on these things.