My Ryzen 9 had a default boost limit of 90 °C, which caused a lot of stress to the rest of the cooling system in my PC but it didn’t seem to have any problem running like that for a few hours. (Fortunately you can crank it down to something a bit more sensible in the BIOS.) My laptop will spike briefly over 100 °C, but only for a second or two. I can see the ‘failure’ temperature being a bit higher, but 200 °C seems unreasonably hot.
Yeah, that’s kind of where my confusion comes from. 93C seems pretty low for a failure temp, my old AMD started throttling at around 90C, but I fully recognize that is pretty hot for a processor and “most” would fall below that. Unless they’re meaning temperature at the transistors most fail at 200C. I can definitely see a temperature sensor reading a few 10s of C different from the actual working interface of transistors, where 90C might mean the transistors are around 150C.
Is there a unit conversion error here? Or do I massively misunderstand what “most” means?
200 F is 93 C so I’m going to guess unit conversion
Perhaps they’re talking about junction temperatures, but even then specialist components can only do 175 degrees C briefly.
Is “all” considered to be a subset of “most”?
100% of processors fail, which technically is more than 50%
All processors are computer chips, not all computer chips are processors.
ETA: The article seems to mention processors, but this appears to be a memory chip advancement.
My Ryzen 9 had a default boost limit of 90 °C, which caused a lot of stress to the rest of the cooling system in my PC but it didn’t seem to have any problem running like that for a few hours. (Fortunately you can crank it down to something a bit more sensible in the BIOS.) My laptop will spike briefly over 100 °C, but only for a second or two. I can see the ‘failure’ temperature being a bit higher, but 200 °C seems unreasonably hot.
Yeah, that’s kind of where my confusion comes from. 93C seems pretty low for a failure temp, my old AMD started throttling at around 90C, but I fully recognize that is pretty hot for a processor and “most” would fall below that. Unless they’re meaning temperature at the transistors most fail at 200C. I can definitely see a temperature sensor reading a few 10s of C different from the actual working interface of transistors, where 90C might mean the transistors are around 150C.
F scale doing what it does best.