Just a quick reminder that discs that you burn yourself at home do degrade pretty quickly, much faster than pressed discs.
I personally have had burned discs that failed after approx. 6 years. It can happen even faster if you use low-quality discs.
Even pressed discs can fail after 20 years if you are unlucky.
Using 2 big HDDs (2 for redundancy) full of your installers might be safer in the long run and also easier to manage and backup.
It can happen even faster if you use low-quality discs.
Yep. I got some no-name DVDs at Kaufland as they were just EUR 1 for a 10-pack. They started having read issues after just 4 years.
Also, they easily peel apart with just fingers and no effort.
The worst case I experienced was a disc that disintegrated after a couple years. It got an actual extra hole in it, in a way that looked like somebody spilled acid on it and the acid burned right through the disc. In reality it just lay in my drawer.
Print them on clay tablets. Those will stand the test of time, especially with the right level of error correction. (Sorry for the ad cancer - I didn’t want to promote a specific brand or spend forever finding a good review site.)
Corrosion-resistent is not the same as non-corrosive.
I suppose gold as a noble metal would be stable over a long period, as it’s non-reactive. But certain kinds of acids can still dissolve it, unlike ceramic
I mean they are games that i no longer have to worry about data corruption or loss. Like ever. And i can Will these to family & friends. The cost is easily worth that!
Yeah, normal burners are more like printers, where the write laser activates or deactivates a pigment which then either reflects or absorbs the read laser to represent 0/1. But that pigment can degrade over time, turning 1s into 0s.
M-discs are instead etched and iirc use constructive and destructive interference so the reader (which is the same reader as normal discs, just the writer needs to specifically support M-disc) reads the 0/1. It will also degrade over time, but since it’s a thicker layer of difference, it will last significantly longer than a thin layer of pigment. And I bet that special m-disc specific readers could be made to read it again after it degrades to the point where the interference technique stops working, since an image could still show where the high and low points are, even if the waves don’t align perfectly anymore.
In practice, I’ve found that the drive was way easier to find than the media for m-disc. Like most optical disc writers these days seem to support it but the discs are expensive af compared to non m-disc.
Though when I was going through my old burnt CDs and DVDs, I was surprised at how well they were holding up. I was expecting at least some read errors by now but everything has been fine so far.
Well, other than the data quality lol. Not like the readability of the file but stuff that took days to download back then would download today in seconds and a good monitor I got well after my early files was only 720p for its resolution. The data I prized as a youth is kinda sad today.
What about Verbatim AZO? I’ve heard good stuff about those, and they’re not expensive.
Also, as far as CDs go, I’ve found that an old degraded player which doesn’t read burned discs anymore but plays pressed discs will still play burned AZO discs just fine.
Just a quick reminder that discs that you burn yourself at home do degrade pretty quickly, much faster than pressed discs. I personally have had burned discs that failed after approx. 6 years. It can happen even faster if you use low-quality discs. Even pressed discs can fail after 20 years if you are unlucky.
Using 2 big HDDs (2 for redundancy) full of your installers might be safer in the long run and also easier to manage and backup.
https://digital-archivist.com/how-long-do-dvds-last-and-cds
Try M-Disc, it’s supposed to be as good as microfilm for archival.
Big Disc propaganda
Yep. I got some no-name DVDs at Kaufland as they were just EUR 1 for a 10-pack. They started having read issues after just 4 years.
Also, they easily peel apart with just fingers and no effort.
Edit:
Packaging:
Media ID: MBI 01RG40
The worst case I experienced was a disc that disintegrated after a couple years. It got an actual extra hole in it, in a way that looked like somebody spilled acid on it and the acid burned right through the disc. In reality it just lay in my drawer.
In your acid draw?
That’s why I print out all my downloaded games
Print them on clay tablets. Those will stand the test of time, especially with the right level of error correction. (Sorry for the ad cancer - I didn’t want to promote a specific brand or spend forever finding a good review site.)
Unfortunately I’m allergic to clay
I hope you also laminate them for longevity.
I laminate my punch cards for longevity. Wouldn’t want them breaking down.
I prefer to cut archival cards from 0.7mm 316 stainless steel sheet 👍
Clay tablets have been demonstrated to last much longer than paper or metal
Nonsense. I got some high quality copper from a merchant I fully trust and I bet this will last forever.
I suspect corrosion-resistant steel alloys haven’t been around long enough to prove themselves in that regard XD
Corrosion-resistent is not the same as non-corrosive.
I suppose gold as a noble metal would be stable over a long period, as it’s non-reactive. But certain kinds of acids can still dissolve it, unlike ceramic
The special ones, yes
I eat those to gain their power.
You should really move to microfilm. It saves so much space!
It just doesn’t smell the same
And reminder that solid state drives (including thumb drives) can lose data after a couple years if they are not plugged in from time to time
Use M-Disc media. It’s said to last 1000 years. It’s expensive and very slow to rip at the suggested 4x speed.
I’ve been very satisfied with them, and you just need a regular Blu-Ray drive.
Cheapest solution is an HDD + one more for backups. M-Discs for 15-17€ per 100GB are for the games you wanna take to your grave.
I mean they are games that i no longer have to worry about data corruption or loss. Like ever. And i can Will these to family & friends. The cost is easily worth that!
Yeah, normal burners are more like printers, where the write laser activates or deactivates a pigment which then either reflects or absorbs the read laser to represent 0/1. But that pigment can degrade over time, turning 1s into 0s.
M-discs are instead etched and iirc use constructive and destructive interference so the reader (which is the same reader as normal discs, just the writer needs to specifically support M-disc) reads the 0/1. It will also degrade over time, but since it’s a thicker layer of difference, it will last significantly longer than a thin layer of pigment. And I bet that special m-disc specific readers could be made to read it again after it degrades to the point where the interference technique stops working, since an image could still show where the high and low points are, even if the waves don’t align perfectly anymore.
In practice, I’ve found that the drive was way easier to find than the media for m-disc. Like most optical disc writers these days seem to support it but the discs are expensive af compared to non m-disc.
Though when I was going through my old burnt CDs and DVDs, I was surprised at how well they were holding up. I was expecting at least some read errors by now but everything has been fine so far.
Well, other than the data quality lol. Not like the readability of the file but stuff that took days to download back then would download today in seconds and a good monitor I got well after my early files was only 720p for its resolution. The data I prized as a youth is kinda sad today.
What about Verbatim AZO? I’ve heard good stuff about those, and they’re not expensive.
Also, as far as CDs go, I’ve found that an old degraded player which doesn’t read burned discs anymore but plays pressed discs will still play burned AZO discs just fine.
blu ray in this economy?
Are tape drives still a thing?
Yup
If I were more serous I would probably get a couple of those. I remember it being part of our procedures at a gov office.
yup. God knows how many Dreamcast games I’ve had to toss and reburn over the years.