Wireguard is blocked in my country, so I no longer can use Tailscale or other Wireguard-based solutions. My home server is behind a NAT. What other ways of secure private connection can I use?
I’m new to all this, how is wireguard banned and enforced? Seems odd
I’m an expert at nothing, but I would imagine that different VPN like WireGuard have different detectable signatures, much like different browsers have different signatures that can be detected. Also, for commercial VPNs, the IPs that the VPN company uses are easily identifiable.
I’ll recommend this new VPN thing :
Its new so its evolving quickly with weekly releases and nightly builds.
Lots of people have told me about their grievance list due to AI having a big part in the development. It’s a bunch of guys in the team, so there’s the human element there.
As for my opinion, it’s the only VPN I’ve managed to get working on my own.
I lost connection yesterday and I am not sure what happened but my home computer and my phone were on the same VPN constantly for a week. Jumping from the house WiFi to 5g didn’t break the VPN connection but it did take a few seconds the first time I did it.
My other option would be Tailscale.
OpenVPN in TCP mode wrapped around Stunnel. That’s the thing that works.
I have it set up to bypass VPN restrictions in some networks, but it also serves to bypass a lot more stuff if you know what you’re doing.
DPI will only see TLS traffic, and assume it’s HTTP. You can even try to fool it by modifying the packet headers, so dumb enough DPI will think you’re connecting to the site you choose.
AmneziaWG is a Wireguard fork built against deep packet inspection, try that.
Neat, I might have to set this up for myself. It sounds like it could get around some of the VPN blocking I’ve seen while traveling through airports.
First, you need to verify whether you actually have a public IP or if your ISP has you stuck behind CG-NAT, because that dictates your options.
If you’re behind CG-NAT, Cloudflare Tunnel (cloudflared): This is usually the easiest path if you are mostly trying to access web-based services (HTTP/HTTPS) on your server. Your home server initiates the outbound connection to Cloudflare, so CG-NAT doesn’t matter. You just set up a domain (or subdomains) for each service you want to reach. If you need full network-level or SSH access rather than just web apps, check out ZeroTier.
If you have a direct public IP (even a dynamic one), you can run a reverse proxy like Caddy paired with a free DDNS provider like DuckDNS or FreeDNS. One nice thing about Caddy is that it handles getting and renewing real, valid Let’s Encrypt SSL certificates automatically, so you don’t have to deal with manual or self-signed certs at all.
Dealing with the WireGuard block, if your country’s ISP is using Deep Packet Inspection (DPI) to identify and drop WireGuard traffic, traditional VPNs like OpenVPN might get blocked pretty quickly too. If you still want a true VPN setup, look into AmneziaWG (it’s a fork of WireGuard specifically modified to scramble packet signatures and bypass DPI) or obfuscated proxy protocols like V2Ray / Xray or Shadowsocks.
Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:
Fewer Letters More Letters DNS Domain Name Service/System ISP Internet Service Provider NAT Network Address Translation SSH Secure Shell for remote terminal access TLS Transport Layer Security, supersedes SSL VPN Virtual Private Network VPS Virtual Private Server (opposed to shared hosting)
[Thread #84 for this comm, first seen 21st Aug 2026, 16:20] [FAQ] [Full list] [Contact] [Source code]
If you get a Mikrotik router it comes with a back to home VPN server and a dedicated DDNS.
You need to know a bit about network configuration, although the setup wizard is sufficient for most use cases.
When you enable to BTH VPN, it does all of the configuration for you. And it works for me behind a double NAT
https://github.com/erebe/wstunnel seems like the obvious solution.
Or maybe OpenVPN over normal TLS on port 443.
You could try to run Wireguard on a different port which would be otherwise used by some very common service, maybe there’s some general exemption for port 21, 22, 53, 80, 443…
OpenVPN is my current method. Got it running on port 443 with user certificate authentication, and tls-crypt on top of that to completely mask the protocol from VPN detectors.
Also technically prevents DoS attacks, but that wasn’t my primary goal.
Does netbird run on wg on on ovpn as well? Maybe that’s an option…
I’m not really an expert on VPN, but I believe solutions like Tailscale, Netbird, Pangolin all leverage the Wireguard protocol.
Yeah, WG is by far the best way to do this kind of networking.
NetBird is Wireguard yes.
Self hosted networking! Legitimately one of my favourite topics
You won’t get around the requirement of a publicly reachable endpoint. That can either be a small server with a public ip or dynamic DNS to your home with port forwarding for the VPN.
A classic option is OpenVPN. You can run it on Port 443 in TCP mode and while it won’t be performant, it has a better chance of bypassing most simple blocks
Other than that I’m a fan of completely decentralized mesh VPNs.
The one I use and am most familiar with is Yggdrasil. Connections can be established over TCP, TLS or QUIC on any port you want.
I’ve written a somewhat lengthy comment under this post. One advantage to Yggdrasil would be its existing public network. If you can firewall of your home lab to the point where joining the public network doesn’t expose a security risk to your local network, you could use that to transport your traffic instead of having your own public node or port forwarding.The same post also mentions Anywherelan, it’s intended to have better NAT handling out of the box by using community nodes.
Then there’s also EasyTier mentioned at the bottom, it is a Chinese project and those tend to have good censorship resistance.
Finally I’ll mention Nebula, it requires at least one coordination server but might also be an option
Nebula might actually work as it doesn’t use Wireguard
Thank you for your info, I’ll be checking out these projects.
Possibly Tor? It supports TCP traffic so SSH should work
Outside of that I would look into censorship resistant protocols and techniques. What country are you in?
Port forward your SSH-server. You can forward ports through SSH to access web services or others running on the server or anything else in the network.
But only allow access through keys. And maybe try to use a different port than 22. That usually gets hammered a lot, trying to find accounts with weak passwords.
Yep, that a good option. But only with a key ! Not with a password.
Bot from everywhere will try to forcebrut attack with many password attempt.
I got in this situation in the past. Nothing wrong happened, but it was stressfull.
Changing the port doesn’t actually accomplish much
Best practice is to just harden SSH so that not traffic gets nowhere
Can you port forward on the router?
Big Netbird fan, and they support a fully self hosted version.
Wow. Do they block VPNs inside your country too?
Anyway, there’s openvpn and there’s nebula (I think nebula doesn’t use wireguard… do double-check), or you look into things built specifically to hide traffic (keyword: “vpn obfuscation”).
No idea if VPN protocols other than wireguard may be blocked too (probably?).
No idea if trying too hard to circumvent government policies may get you added to some list you’d rather not be in.Wireguard is effectively blocked in China, from my experience so far.
China uses deep packet inspection so that makes sense
I think the the great Firewall is less restrictive with QUIC traffic. It might be worth trying fragmented QUIC as from what I’ve read the GFW struggles to reconstruct the traffic
From what I can tell, the issue with Wireguard is that the traffic is quite obvious. Other options might be blocked, but technically harder to implement said blocks.
That’s quite fascinating, didn’t realize Wireguard could be blocked in that way (although the WG traffic is pretty obvious looking, so it makes sense). The only solution I know of without a need for a VPS is hosting everything on Tor. Wildly private and secure, but also wildly slow. Beyond that, there are a number of ways of using a VPS to similar effect, I know people have used Cloudflare Tunnel to similar effect in the past.
Also, there are apparently quite a number of wiregaurd derivatives which protect better against detection and blocking methods. amnezia and wstunnel are the two that came up. Likewise, you will need a VPS, and might even be able to set up a tailscale-like coordination server that way (maybe with headscale, or maybe with one of its competitors like NetBird).
ZeroTier might also get the job done, but I really don’t know much about it.
Hope this helps, and good lucks!
