That makes sense, you do not want bubbles and it surely will overflow. But why should they burn out because of that? There is lower resistance etc. and cooling is still mostly working. I really see no way how it damages the machine. I repaired a bunch before, so this is not coming from nowhere. So I googled and found this:
https://robertbair.com/blog/i-accidentally-put-dish-soap-dishwasher-now-what
And that makes total sense. It only damages if the soap “crust” builds up too much. That is not a quick thing to happen. Otherwise it is all about the mess or makes.
Most dishwasher pumps rely on the water flow generated while running to remain cool under normal use. When I say that they burn out, I mean that the motor literally burns its wires bad enough that the electric signal no longer carries properly.
All it takes for this to happen is for the motor to run for a length of time without anything going through it, which bubbles can and do prevent happening. You will find this in nearly every single pump that pushes water: the design requires water running through it in order to maintain proper temperatures.
Dishwashers often have a single pump for water flow, so if the washer fills with bubbles and the water gets low enough, the one thing that cools the dishwasher motor can easily stop running for a couple hours, despite technically being surrounded by water.
![The wife, the problem, the reason [Arcade Rage]](https://lemmy.world/pictrs/image/41214b11-d4b5-4ab7-bcad-07ab2421c020.jpeg){kind=link}
That makes sense, you do not want bubbles and it surely will overflow. But why should they burn out because of that? There is lower resistance etc. and cooling is still mostly working. I really see no way how it damages the machine. I repaired a bunch before, so this is not coming from nowhere. So I googled and found this: https://robertbair.com/blog/i-accidentally-put-dish-soap-dishwasher-now-what And that makes total sense. It only damages if the soap “crust” builds up too much. That is not a quick thing to happen. Otherwise it is all about the mess or makes.
Most dishwasher pumps rely on the water flow generated while running to remain cool under normal use. When I say that they burn out, I mean that the motor literally burns its wires bad enough that the electric signal no longer carries properly.
All it takes for this to happen is for the motor to run for a length of time without anything going through it, which bubbles can and do prevent happening. You will find this in nearly every single pump that pushes water: the design requires water running through it in order to maintain proper temperatures.
Dishwashers often have a single pump for water flow, so if the washer fills with bubbles and the water gets low enough, the one thing that cools the dishwasher motor can easily stop running for a couple hours, despite technically being surrounded by water.