The easy fix TL;DW (though you should, Alex is great) is to, right before starting the dishwasher, run the hot water until the tap is as hot as it gets. Drastically improved outcomes.
They probably mean the liquid made for dishwashers, not like regular Dawn dish detergent. My regular local grocery store carries it right next to the box of dishwasher powder
That makes sense, you do not want bubbles and it surely will overflow. But why should they burn out because of that? There is lower resistance etc. and cooling is still mostly working. I really see no way how it damages the machine. I repaired a bunch before, so this is not coming from nowhere. So I googled and found this:
https://robertbair.com/blog/i-accidentally-put-dish-soap-dishwasher-now-what
And that makes total sense. It only damages if the soap “crust” builds up too much. That is not a quick thing to happen. Otherwise it is all about the mess or makes.
Most dishwasher pumps rely on the water flow generated while running to remain cool under normal use. When I say that they burn out, I mean that the motor literally burns its wires bad enough that the electric signal no longer carries properly.
All it takes for this to happen is for the motor to run for a length of time without anything going through it, which bubbles can and do prevent happening. You will find this in nearly every single pump that pushes water: the design requires water running through it in order to maintain proper temperatures.
Dishwashers often have a single pump for water flow, so if the washer fills with bubbles and the water gets low enough, the one thing that cools the dishwasher motor can easily stop running for a couple hours, despite technically being surrounded by water.
Only sometimes. Just put everything in as is and hand wash what doesn’t come out clean. This applies more to newer washers rather than the old ones that just redistribute the filth.
I remove solids, especially vegetable matter, cell walls and all that. But mainly a fork over the garbage, and on some occasions a light rinse.
And I’ve seen every TC video there is. Even made a patron account just to sub to him. But I could never get the desired result from dishwasher dust, and so I’m a pod man, and I’m happy with what I see, and that’s that.
![The wife, the problem, the reason [Arcade Rage]](https://lemmy.world/pictrs/image/41214b11-d4b5-4ab7-bcad-07ab2421c020.jpeg){kind=link}
But you still have to somewhat wash them before they go in the dishwasher.
Allegedly that is the fault of the pods your using ;) https://www.youtube.com/watch?v=jHP942Livy0
The easy fix TL;DW (though you should, Alex is great) is to, right before starting the dishwasher, run the hot water until the tap is as hot as it gets. Drastically improved outcomes.
Also clean the filter in the bottom. Do not forget proper maintenance or you’ll just be cursing him for not listening to advice he does give.
I took away from his video it’s to put detergent in both spots because there’s two rinses. The running to get hot is just cherry on top to help more
I switched off of pods a few years ago to just dishwashing liquid soap and it has been better.
Jesus fuck how have you not burned out your motor yet. I did that once and ruined my dishwasher instantly.
They probably mean the liquid made for dishwashers, not like regular Dawn dish detergent. My regular local grocery store carries it right next to the box of dishwasher powder
Was that defect caused by that or just happened at that moment? I can not see how it should cause damage if you use any normal detergent.
Liquid dish soap kills dishwashers. The bubbles mean the motor and/or pump fills with bubbles instead of water and often causes them to burn out.
There is liquid dishwasher detergent, too.
That makes sense, you do not want bubbles and it surely will overflow. But why should they burn out because of that? There is lower resistance etc. and cooling is still mostly working. I really see no way how it damages the machine. I repaired a bunch before, so this is not coming from nowhere. So I googled and found this: https://robertbair.com/blog/i-accidentally-put-dish-soap-dishwasher-now-what And that makes total sense. It only damages if the soap “crust” builds up too much. That is not a quick thing to happen. Otherwise it is all about the mess or makes.
Most dishwasher pumps rely on the water flow generated while running to remain cool under normal use. When I say that they burn out, I mean that the motor literally burns its wires bad enough that the electric signal no longer carries properly.
All it takes for this to happen is for the motor to run for a length of time without anything going through it, which bubbles can and do prevent happening. You will find this in nearly every single pump that pushes water: the design requires water running through it in order to maintain proper temperatures.
Dishwashers often have a single pump for water flow, so if the washer fills with bubbles and the water gets low enough, the one thing that cools the dishwasher motor can easily stop running for a couple hours, despite technically being surrounded by water.
Only sometimes. Just put everything in as is and hand wash what doesn’t come out clean. This applies more to newer washers rather than the old ones that just redistribute the filth.
I remove solids, especially vegetable matter, cell walls and all that. But mainly a fork over the garbage, and on some occasions a light rinse.
And I’ve seen every TC video there is. Even made a patron account just to sub to him. But I could never get the desired result from dishwasher dust, and so I’m a pod man, and I’m happy with what I see, and that’s that.
Sadly I have an older one that requires more pre washing.